ShellTex®
Fitting guide

How to install ShellTex graphics

One person can fit a wall. For walls over four metres wide, we recommend two people.

1. Take the clips out of the box
1. Take the clips out of the box
2. Slide the top fixings onto the rail
2. Slide the top fixings onto the rail
3. Turn the rail through 180° so the hooks point upwards
3. Turn the rail through 180° so the hooks point upwards
4. Hook the graphic over the top beam
4. Hook the graphic over the top beam
5. Work along the wall, hooking the graphic into place
5. Work along the wall, hooking the graphic into place
6. Slide the graphic sideways to centre it
6. Slide the graphic sideways to centre it
7. Fit two elasticated hooks to each lower rail
7. Fit two elasticated hooks to each lower rail
8. Hook them under the bottom beam to tension the fabric
8. Hook them under the bottom beam to tension the fabric
9. Fit the remaining lower hooks and check the wall
9. Fit the remaining lower hooks and check the wall

How to pack your wall after the show